AutoEDU is producing automotive training aids for use of both for students and for teachers. Training aids are made from car parts which usually you can find on the real cars. AutoEDU automotive training aids is specially designed for students of technical studies for theoretical and practical training. And for teachers for easier explanations of the vehicle technologies. This time it is clutch, typical membrane spring clutch which is usually hidden with clutch case (clutch bell housing).
For a better understanding of the structure, the trainer it is made as a cutaway model and it still has all functions. The clutch transmits the engine power to the gearbox, and it allows the transmission to be interrupted while the gear is selected to move off from a stationary position, or when gears are changed while the car is moving. When the car is moving under the power the clutch is engaged, it means on AutoEDU clutch training aid the handle should be released and clutch disk pressed by the pressure plate. If you want to release the clutch disc, you should push the handle and then you will be able to turn the shaft with the disc. The operation could be seen through cutaway part of the pressure plate. AutoEDU cutaway model is a great tool which allows students to become familiar with the car’s diaphragm spring clutch, the structure, and operation.