All our manufactured automotive training equipment: working engine models, training boards - simulators of cars and trucks are compatible and could be supplied together with different diagnostic equipment for reading fault codes, live data parameters, activation tests through 16 pole OBD diagnostic connectors or for measurements with multimeter or oscilloscope via pinout facilities. Wheel alignment training stand can be delivered together with the wheel alignment system and different type of car lift. Cutaway engine models can be supplied with different timing or special tools.
AutoEDU manufactures automotive training equipment according to the customer needs, technology or training program. Also, AutoEDU offers a virtual „e-learning“ programs, ability to equip a training class with educational equipment, teaching material – theoretical and practical for the teachers and examinational tasks and tests for the students. All manufactured equipment can be offered with different diagnostic and measurement equipment, garage equipment and hand tools. If later there is a need, AutoEDU personnel consults, trains, updates, services and repairs supplied educational equipment. Our company can offer a broad range of hand tools, various garage, diagnostic and measurement equipment.
Diagnostics, oscilloscopes, gas analyzers
Our company can offer partners produced a professional garage, workshop, welding and metal processing equipment and tools.
Diagnostic and other measuring equipment is compatible with AutoEDU educational equipment and complement each other. Automotive diagnostic equipment can be used to scan the ECU information of the educational equipment. Depending on the ECU with a scanner or a device for self-diagnosis there is ability to read and erase fault codes, display the operating system parameters, activating the actuators and perform coding or configuration functions, if they are supported by the ECU.
Oscilloscope is a very important measurement equipment in a learning process. AutoEDU training boards are made so that would be easy to perform measurements of each component at any time without damaging connections. Almost all AutoEDU training boards are available with open contacts so that would be easy connect and perform measurements with two or four channel oscilloscope.
All AutoEDU working petrol engine models have ability to measure the exhaust gas before and after catalytic converter. Using the gas analyzer there is a great opportunity to demonstrate the processes occurring in the vehicle exhaust system. The gas analysis equipment can also be used with AutoEDU educational working diesel engine models.
Air conditioning recharge equipment
Air conditioning recharge and servicing equipment helps to perform demonstrations with air conditioning and climate control system training board or with Toyota Petrol/Electric Hybrid technology functional models where is an integral part of the air-conditioning system with an electric compressor.
Air conditioning recharge station provides an ability to demonstrate the recharging procedures in a training classroom or service center in real terms.
Tyre changer and wheel balancer equipment
Tyre changer is an automatic or semi-automatic tire mounting machine designed for automobiles, light and heavy commercial and agriculture vehicles. Safe and reliable equipment can be delivered together with the additional accessories and other supplies. The wheel balancer machines with modern measuring equipment help to fully complete wheel repair bar for light and heavy commercials vehicles.
Also, we are able to offer another garage equipment that may be used in a training service center. In 2001 our company started its business from diagnostic and garage equipment trade, installation, repair and service. This gained experience allows to offer equipment that would be functional and perfectly compatible with the training process and the mechanic specialty.
Brake testing stand
Brake testing stand is one of the most important pieces of equipment in a training service center for car and commercial vehicle brake maintenance and repair. Although the brakes in modern cars are controlled by electronics, it is necessary to mechanically measure and align brake force for each wheel using brake testing stand.
Training car repair workshops are not imaginable without car lifts that can be different depending on purpose use: 2 post-electro-hydraulic or electromechanical lifts, scissors or cylindrical, with different lifting capacities from 2,5T to 25T for commercial vehicles.
We are able to offer lifts for different kinds of works you would like to perform in a service center. For example, large scissor lifts are commonly used for wheel alignment procedures. Small scissor lifts provide a space-saving solution for wheel repair and diagnostic procedures. Two post lifts are the most popular and commonly used for chassis repair procedures.
Many years of experience in installing professional repair service centers allow to complete and submit different types of car lifts and plan them in accordance with their purpose.
Wheel alignment equipment
Wheel alignment equipment is a great educational tool using it together with AutoEDU wheel alignment training stand. AutoEDU wheel alignment training stand is specially designed to demonstrate the vehicle chassis structure and a maximum of the wheel alignment procedures which are difficult to show on a real car. Both the „3D“ and „Prism“ wheel aligners combine two different types of wheel alignment technology and are perfect for student training.
Workbenches, tool boxes and tools
We offer a large range of different, well-known in the world manufacturers tools. The tools can be assembled in an ergonomic tool boxes or in a drawers of the workbenches. We can offer hand, electric or special tools. We are able to complete tools by car manufacturers` recommendations, engine or chassis types. The workbenches can be offered with different surfaces: wood, metal, rubberized or stainless steel and with lockable walls, drawer units or without them.
Exhaust extraction system
Exhaust extraction system is a very important element in a training service center if you are planning to teach students car engine diagnostic and repair, or have an intent to purchase an engine test stand or in any case, when you expect that the ignition of the car will be switched on and active in a training service area. Again, as with other equipment, there are many different solutions – it is possible to supply mobile exhaust extraction system and there is no need to mount it. If there is an intent for further construction and modernization of the workshop area perhaps you should think about the floor-mounted exhaust extraction system. Also, there are other solutions, such as on the ceiling hanging coils, mounted systems on the wall or hanging rail exhaust systems that allow car to move in a workshop area with an exhaust extraction system connected to the cars’ exhaust system.
Compressors and compressed air equipment
Compressed air is very important in a training repair service center. Well-planned and properly equipped with high-quality materials and a safe piping system, properly calculated air compressor output and productivity will allow the proper use of the equipment and tools. An improperly designed and equipped system does not allow proper and effective use of the equipment. As a result, our company often consults, selects the necessary equipment that would function perfectly.
Our company is able to offer different efficiency rotary screw and reciprocating air compressors, plastic or aluminum piping systems, filters, condensate separation, and lubrication systems.
Other small workshop equipment may be offered depending on what kind of the working processes will be performed in a training repair center. This equipment is not main, but very important: presses, jacks, workshop engine cranes (rotating engine stands) and other hydraulic or pneumatic equipment and tools.
An educational institution often inquires about welding and metalworking equipment. We are able to offer a wide range of welding equipment, from simple semi-automatic to aluminum welding or plasma cutting equipment, spot welding and etc.
Metalworking equipment – metal lathes from school to professional with a digital display. A wide range of milling, drilling, cutting, bending and grinding equipment allows to offer a complete solution for the workshop or small metal processing bar.
Our company has successfully completed equipment installation projects in a number of educational institutions, workshops or car repair service centers where not only already mentioned equipment was used, but also such equipment as car painting cameras, body repair equipment with electronic measurement systems, engine test stands, that could be used for teaching in the repair service center or workshop.
All the above mentioned equipment and tools have been successfully used in other training institutions and in the training process, so you are welcome to contact our company and our well-qualified personnel will help you to choose, design and install equipment according to your choices or needs. Our company offers consultations and trainings for lecturers or teachers if they only need our help. During more than 10 years with many of them we have become partners and mutual beneficial cooperation has grown into a highly appreciated friendship.